Overhead Crane Benefits: Lower Load Damage & Loss By Bridge Crane

Why to use an overhead crane ? Check overhead bridge crane benefits & how overhead crane can reduce your load damage & loss. EOT crane, be your choice!

Custom design overhead crane for material handling reduce your product damage and loss 

What are the Benefits of Overhead Cranes?

When high-quality material handling equipment and tools are needed  for running a warehouse or other large industrial operation, the selection of the  appropriate lifting equipment should be carefully think about to make sure your processes are efficient. You can increase output, swiftly move products and objects throughout your facility, and take advantage of a number of other advantages with an overhead crane, such as:

Enhanced Safety

Forklifts have the potential to misplace items, stack items incorrectly, and cause accidents (due to crashing). An overhead crane doesn't bear any of these risks and can move heavy and bulky loads more rapidly than forklifts because it moves objects through the facility's overhead space.

Precise Load Control

Overhead cranes have precise controls that allow for easy and precise object positioning. This reduces human error and enables the user to position the load precisely where desired.

Overhead Space used , No floor obstructions.

Overhead cranes can avoid barriors on your warehouse floor because they are installed on the runway as high as the ceiling of your building. As a result, you can install the eot crane at your facility by utilizationg overhead space but without taking your floor space and at same time,  you will be able to move objects over any obstacles securely, minimizing product damage.

Better ergonomics

The overhead cranes handle the hefty lifting for you, relieving your operators' strain and lowering risk of harm and worker fatigue.

Easy Weight Lifting

As was already stated, overhead cranes have a high lifting capacity. You can rely on your bridge crane once you have one to raise and move your goods to different areas of your facility. To reduce the risk of accidents or failure, keep in mind that each  eot crane has a designated lift capability.

Customizable

By adding one of the many Below-The-Hook accessories, such as lifting beams, spreader beams, roll & coil lifters, tongs, sheet lifters, and pallet lifters, overhead cranes can be readily customized.

How does bridge crane reduce your loads damage and loss ?

When was the last time a conventional, floor-based vehicle like a forklift damaged a product in your distribution center, warehouse, or production facility? Whether the product was damaged during lifting, lowering, or transportation—or was merely driven into while stationary on the floor or stored in a pallet rack—that destruction comes at a price. In reality, there are numerous expenses, such as:

• The damaged product cause loss.
• The costs involved in fixing or discarding the damaged goods.
• The time expended storing or manufacturing it.
• The possible loss of a customer whose dissatisfaction results from receiving a damaged product after expecting to receive an intact one within a specific amount of time.
• The possibility of a product being harmed by contact with another building or piece of machinery, as well as any harm to the facility or other equipment housed there.
• The resulting collision-related harm to the floor-based vehicle.

Another choice is to use  overhead cranes,such as overhead hoists, gantry cranes and monorails. Overhead handling technologies, which are provided as an alternative to floor-based product movement, can significantly lower the risk of harm to goods while they are lifted, lowered, transported, or simply sitting in storage. Reducing the possibility of merchandise destruction also lessens the potential cost to the company's bottom line.

Overhead cranes help to reduce your product damage and loses in the following ways:

1. By dodging pitfalls.

Motor vehicles moving loads on the floor must navigate through confined spaces, round sharp curves, stay clear of building fixtures like columns and pallet racks, and be alert to pedestrians and blind spots. The likelihood of a collision is increased by all of those curves and twists. On the other hand, overhead handling equipment allows direct-path transportation over any obstructions that might prevent a floor-based load transport vehicle from traveling in a straight line. Products are lifted and moved through the open area above, literally gliding through the air, avoiding possible impacts and subsequent damage.

2. Through deliberate motion.

Overhead lifting systems, as opposed to motorized, floor-based load handlers, autonomously self-center each cargo as it is raised in the air. This lessens the possibility of the product toppling over during transit or running into other pieces of machinery or equipment. Furthermore, controllers with soft start features are installed in aerial cranes, hoists, and monorails. This feature makes sure that lifting and moving of the merchandise is done gently. In order to provide the best possible control as the load is transported to its location, overhead systems also feature multiple or variable speed choices.

3. Equipped with load-specific fitting devices.

There are load-specific below the hook devices in addition to the ability to customize the monorails, cranes, and hoists themselves to suit each particular application (also sometimes called end effectors). These add-ons are employed to facilitate the handling of various goods. C hooks, gripping lifters, mechanical lifters, vacuum lifters, sheet lifters, lifting beams, magnets, slings, drum turners, and many other designs, styles, and kinds are available.

What are the uses of overhead crane?

Overhead cranes, also known as bridge & jib cranes, are frequently used in industrial settings to process and handle heavy, oversized items that cannot be handled by other material handling techniques or machinery. They are used in many different contexts, such as:

• Warehousing to transport big, heavy objects to and from the dock areas;
• Assembly to move unfinished goods through their manufacturing processes.
• Transport used to transfer manufactured goods onto open trailers or railcars.
• Storage is used to move large and/or bulky cargo between storage locations.

What to know more on overhead crane use?  Click to check Where are overhead cranes used? Main Industrial Uses of Bridge Cranes. Are the eot crane right for your application? Contact us to get free consultation now.