The operation essentials of gantry crane stable hook

What are the essentials for the operation of the gantry crane stable hook? Below are the crane manufacturers staff to explain to customers and friends. Hope our introduction can help you better

     1. Motor car and stable hook operation during operation: some sudden situations will cause the crane to suddenly accelerate forward or suddenly push the block, and the hanging object can not keep up with the forward speed of the crane and sway. The relevant analysis can be obtained through the analysis of the crane principle. Operation suggestion, you can push the controller handle of the cart or trolley back to the zero position, wait until the hanging object forwards beyond the vertical position, and then keep up with the vertical position of the hanging object in time. This method is for the crane of the gantry crane operator Operational proficiency is very demanding. To keep the crane able to keep up with the swing of the hook, sometimes it is necessary to decelerate and accelerate the crane more than once to match the swing of the hanging object. Therefore, the gantry crane hook stabilization operation is a mastery of the overall operation of the crane. , Otherwise it will affect the efficiency of the stable hook.
     2. Hook stabilization operation when parking: the suspension stabilization hook can be quickly stopped at the specified position at the moment of parking. It ensures the stability of the hanging object during movement and even when it is started. The car moves with the hanging object accurately. At the moment of parking, there is no guarantee that the hanging object will be able to stop at the designated position stably, and the parking place is too urgent. Too slow or the deviation of the parking position will cause the swing of the hanging object. If the hook is not properly stabilized, it may also cause the hanging object to fall. This is not only an impact on the work efficiency, but also the improper consequence of the crane operator’s operation. The object is stable at the designated position at the moment of parking. The inertial swing of the crane with the movement of the crane should be reduced. Before the crane is stopped from the parking position, the crane controller handle should be returned to the zero position to make the crane slowly move to the designated position. When the crane reaches the designated position, the hanging object will also stabilize and stop at the designated position steadily.
     3. Integrated hook stabilization technology when swinging: When the large and small vehicles start suddenly together, due to the rapid acceleration and sudden movement, the hanging objects will often produce arc-shaped swings. At this time, you can control the large and small vehicles separately and separate them to solve the problem. Each method of causing the swing can also be carried out at the same time for the operation of the large and small cars, and the swing of the hanging object can be controlled together. This is not only a requirement for the personal quality of the crane operators, but also the tacit cooperation of the crane operators to achieve any cooperation between the gantry cranes in the operation and achieve the most efficient use of the crane.