The metallurgical electric hoist is noisy and indicates that there is a fault
Metallurgical electric hoist is a lifting-related equipment that provides help for the transportation tasks of heavy industry. However, sometimes there will be some failures or some noises during use. Does the noise indicate that there is a problem with the metallurgical electric hoist?
When there are problems with the control appliances, motors or reducers in the metallurgical electric hoist, some unusual noises may appear. These noises do indicate that the equipment is malfunctioning. Therefore, inspection and maintenance should be carried out in time.
If the control device fails, it may make some low noises. If the contactor is broken, such as poor contact, unstable voltage, etc., the contactor needs to be repaired at this time. If the repair is really not good, you can replace it. If there is a problem with the contactor, the problem can be solved after replacement.
The source of noise may be from the motor. If the motor has a problem, it will run unstable and cause noise. At this time, it is necessary to stop the machine under the condition that the goods are not dangerous, and check the motor carefully.
